EasyManua.ls Logo

Matrix Telecom ETERNITY NE - Page 237

Matrix Telecom ETERNITY NE
1370 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Matrix ETERNITY NE System Manual 227
Configure specific parameters (for example, SIP ID/User Name, Authentication ID, Password, Server
Address/Domain Name etc.) in the Open SIP Phone/devices which are required to be registered with
SARVAM UCS. For more information, refer the product documentation supplied with the Open SIP Phone/
device you want to use.
For Open SIP phones, the parameters in Device Settings - Location1 or 2 or 3 are not applicable.
Configuring Open SIP Phones using Auto Provisioning
SARVAM UCS supports the following third party Open SIP Phones for Auto Provisioning-
Panasonic UTG200B
Grandstream GXP110x
Grandstream GXP2200
Grandstream GXP21xx/116x/14xx
Grandstream GXV3140/3175
Yealink SIP-T19P/SIP-T21P/T22P/T26P/T28P/T4X
Yealink SIP-T20P
Yealink SIP-T3XG
Cisco SPA50xG/51xG SIP Phone
Cisco SPA525G SIP Phone
Polycom IP Phone
Snom IP Phone
Htek 802
SPARSH VP110
SPARSH VP710 - Standard
Connecting the Open SIP Phone
To be able to configure and register the Open SIP Phone with SARVAM UCS using Auto Provisioning,
Connect and reboot the Open SIP Phone.
Make sure that DHCP is selected as the Connection Type in the Open SIP Phone.
For Auto Provisioning, you must configure the Open SIP phones at Device Settings - Location1 only.
The phone will automatically fetch the configuration file(s) from SARVAM UCS and will get registered.
You can use any third party DHCP Server in your LAN for assigning the ‘Auto Provisioning Server Address’ and
‘Server Port’ to the Open SIP Phones.
Using the built-in DHCP Server of SARVAM UCS
Make sure the Open SIP Phone is connected in the same subnet as that of the Ethernet Port of SARVAM
UCS.
The ‘Auto Provisioning Server Address’ and ‘Server Port’ value will be provided to the Open SIP Phone
using DHCP Option 66 in the format - http://IP Address:SPARSH Port of SARVAM UCS.
Using any third party DHCP Server in your LAN
Make sure that the third party DHCP Server and your Open SIP Phone, both are connected in the same
subnet as that of the Ethernet Port of SARVAM UCS.

Table of Contents

Related product manuals