228 Matrix ETERNITY NE System Manual
• Select DHCP Option 66, and configure Data type in that third party DHCP Server in the following format -
http://IP Address:SPARSH Port of SARVAM UCS.
If you are using Auto Provisioning and if the Open SIP Phone has multiple SIP accounts, it is
recommended to keep the first SIP Account in default settings. After Auto Provisioning, the old
configuration, if present for this account will be deleted automatically and it will get registered with the
SARVAM UCS.
Configuring Panasonic Open SIP Phone
You are recommended to complete the following steps before connecting Panasonic UTG200B:
• Decide the physical location of the Open SIP Phone.
• Log into Jeeves as the System Engineer.
• Configure “DHCP Server” of SARVAM UCS in the “Network Parameters”. The DHCP Server of SARVAM
UCS will be used for assigning the ‘Auto Provisioning Server Address’ and ‘Server Port’ to the Open SIP
Phone.
If you are using third party DHCP Server in your LAN, see “Using any third party DHCP Server in your
LAN”.
• Configure the SIP Extension General Parameters in SARVAM UCS. For details, see “Configuring SIP
Extension General Parameters” in “SIP Extensions”.
49
• Configure the device specific settings applicable to your Panasonic UTG200B at Location1 of the SIP
Extension page. To do so,
• Click SIP Extensions.
• Click Device Settings - Location1 to expand and configure the following parameters.
49. Some of the parameters may not be applicable depending on the Open SIP Phone you have connected. Please refer the specific
Open SIP Phone manufacturer’s documentation for more details.
Parameter Description/Action to be Taken
Applicable
Open SIP
Phone Variant
Enable
Device
Select the Enable Device check box.
Panasonic
UTG200B
Location
Name
Configure the Location Name to identify the phone. The
Location Name can be a maximum of 18 characters. Default:
Blank.
Panasonic
UTG200B
Device Type
Select Device Type as Panasonic UTG200B and click Submit
to save.
Panasonic
UTG200B
MAC
Address
Enter the MAC Address of the Panasonic phone to be
connected at this location. Default: Blank.
SARVAM UCS validates the phone on the basis of the MAC
Address and provides configuration on validation.
Panasonic
UTG200B
To Next Page
Loading...
