EasyManua.ls Logo

Matrix Telecom ETERNITY NE - Page 248

Matrix Telecom ETERNITY NE
1370 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
238 Matrix ETERNITY NE System Manual
Click Device Settings - Location1 to expand and configure the following parameters.
Parameter Description/Action to be Taken
Applicable Open SIP
Phone Variant
Enable Device Select the Enable Device check box.
1. Cisco SPA50xG/51xG
SIP Phone
2. Cisco SPA525G SIP
Phone
Location Name
Configure the Location Name to identify the
Open SIP Phone. The Location Name can be
a maximum of 18 characters. Default: Blank.
1. Cisco SPA50xG/51xG
SIP Phone
2. Cisco SPA525G SIP
Phone
Device Type
Select Device Type as any of the desired
Cisco Phone you want to connect and click
Submit to save.
1. Cisco SPA50xG/51xG
SIP Phone
2. Cisco SPA525G SIP
Phone
MAC Address
Enter the MAC Address of the Cisco phone to
be connected at this location. Default: Blank.
SARVAM UCS validates the phone on the
basis of the MAC Address, and provides
configuration on validation.
1. Cisco SPA50xG/51xG
SIP Phone
2. Cisco SPA525G SIP
Phone
Authenticate
HTTP
Provisioning
request
Select the Authenticate HTTP Provisioning
request check box to authenticate HTTP
request for security reason. Default: Disabled.
If you are using the Open SIP Phone from the
Public IP Address, we recommend you to
enable this option.
SARVAM UCS validates the Open SIP Phone
on the basis of the SIP ID and HTTP
Authentication Password and provides
configuration on validation.
Make sure, you have configured SIP ID as
HTTP User Name and HTTP Authentication
Password as HTTP Password in the Open
SIP Phone.
1. Cisco SPA50xG/51xG
SIP Phone
2. Cisco SPA525G SIP
Phone
Registrar
Server Address
Select the appropriate Registrar Server
Address according to your installation
scenario
a
to register the Open SIP Phone
with the SIP Registrar of SARVAM UCS.
Default: Use Ethernet IP Address.
1. Cisco SPA50xG/51xG
SIP Phone
2. Cisco SPA525G SIP
Phone
Send Phone
Book
Select the Send Phone Book check box to
enable downloading of the Phone Book
(consisting of Extension and Global Directory
Contacts) from the SARVAM UCS. Default:
Enabled.
1. Cisco SPA50xG/51xG
SIP Phone
2. Cisco SPA525G SIP
Phone

Table of Contents

Related product manuals