Matrix Telecom ETERNITY NE - Page 249

Matrix ETERNITY NE System Manual 239
Phonebook
Name
Configure the Name of the Phonebook. This
name will be displayed on the Phone LCD. It
can be of maximum 32 characters. Default:
Corporate Directory
1. Cisco SPA50xG/51xG
SIP Phone
2. Cisco SPA525G SIP
Phone
User Password
Configure the User Password
b
of the Open
SIP Phone. It can be a minimum of 1
character to a maximum of 16 characters.
Default: Blank
1. Cisco SPA50xG/51xG
SIP Phone
2. Cisco SPA525G SIP
Phone
Admin
Password
Configure the Admin Password
c
of the Cisco
phone. It can be a minimum of 1 character to
a maximum of 16 characters. Default: Blank
1. Cisco SPA50xG/51xG
SIP Phone
2. Cisco SPA525G SIP
Phone
Phone User
Interface
Language
Select the desired language in which the
Open SIP Phone’s User Interface should be
displayed. Default: English-US
1. Cisco SPA50xG/51xG
SIP Phone
2. Cisco SPA525G SIP
Phone
Language File
Download Path
Select the path from which the Open SIP
Phone must fetch the Language files. Default:
None. Make sure you configure the desired
Path (Server Address/es) in the “Third Party
IP-Phone General Parameters”.
1. Cisco SPA50xG/51xG
SIP Phone
2. Cisco SPA525G SIP
Phone
Time Zone
Select the Time Zone of the region/country
where the Open SIP Phone is installed.
Default: GMT +05:30
1. Cisco SPA50xG/51xG
SIP Phone
2. Cisco SPA525G SIP
Phone
Enable DST
If DST is applicable, select the Enable DST
check box. A list of DST parameters appear.
Configure them as per your requirement.
Default: Disabled
1. Cisco SPA50xG/51xG
SIP Phone
2. Cisco SPA525G SIP
Phone