Matrix Telecom ETERNITY NE - Page 252

242 Matrix ETERNITY NE System Manual
MAC Address
Enter the MAC Address of the Polycom phone
to be connected at this location. Default: Blank.
SARVAM UCS validates the phone on the
basis of the MAC Address, and provides
configuration on validation.
Polycom IP Phone
Authenticate HTTP
Provisioning request
Select the Authenticate HTTP Provisioning
request check box to authenticate HTTP
request for security reason. Default: Disabled.
If you are using the Open SIP Phone from the
Public IP Address, we recommend you to
enable this option.
SARVAM UCS validates the Open SIP Phone
on the basis of the SIP ID and HTTP
Authentication Password and provides
configuration on validation.
Make sure, you have configured SIP ID as
HTTP User Name and HTTP Authentication
Password as HTTP Password in the Open SIP
Phone.
Polycom IP Phone
Registrar Server
Address
Select the appropriate Registrar Server
Address according to your installation
scenario
a
to register the Open SIP Phone with
the SIP Registrar of SARVAM UCS. Default:
Use Ethernet IP Address.
Polycom IP Phone
Send Phone Book
Select the Send Phone Book check box to
enable downloading of the Phone Book
(consisting of Extension and Global Directory
Contacts) from the SARVAM UCS. Default:
Enabled
Polycom IP Phone
User Password
Configure the User Password
b
of the Open SIP
Phone. It can be maximum of 16 characters
long. Default: 123
Polycom IP Phone
Admin Password
Configure the Admin Password
c
of the Open
SIP Phone. It can be a maximum of up to 16
characters. Default: 456
Polycom IP Phone
Phone User Interface
Language
Select the desired language in which the Open
SIP Phone’s User Interface should be
displayed. Default: English Internal (en-in)
Polycom IP Phone
Time Zone
Select the Time Zone of the region/country
where the Open SIP Phone is installed.
Default: + 05:30 India (Calcutta)
Polycom IP Phone