Matrix Telecom ETERNITY NE - Page 253

Matrix ETERNITY NE System Manual 243
Enable DST
If DST is applicable, select the Enable DST
check box. A list of DST parameters appear.
Configure them as per your requirement.
Default: Disabled
Polycom IP Phone
DST Type
Select the DST Type that should be applied to
the Open SIP Phone, either DST by Date or
DST by Week.
Polycom IP Phone
If DST Type = DST by
Date
Start Month
Select the Month from when DST should be
applied.
Polycom IP Phone
Start Day
Select the Day from when DST should be
applied.
Polycom IP Phone
Start Hour
Select the Hour from when DST should be
applied.
Polycom IP Phone
End Month Select the Month when DST should end. Polycom IP Phone
End Day Select the Day when DST should end. Polycom IP Phone
End Hour Select the Hour when DST should end. Polycom IP Phone
If DST Type = DST by
Week
DST Start
Month
Select the Month from when DST should be
applied.
Polycom IP Phone
DST Start
Day of
Week
Select the Day of Week from when DST should
be applied.
Polycom IP Phone
DST Start
Day of
Week Last
in Month
Select the DST Start Day of Week Last in
Month.
Polycom IP Phone
Start Hour
of Day
Select the DST Start Hour of the Day. Polycom IP Phone
DST Stop
Month
Select the Month when DST should end. Polycom IP Phone
DST Stop
Day of
Week
Select the Day of Week when DST should end. Polycom IP Phone
DST Stop
Day of
Week Last
in Month
Select the DST Stop Day of Week Last in
Month.
Polycom IP Phone
End Hour of
Day
Select the DST End Hour of the Day. Polycom IP Phone
Date Display Format
Select the Date Display Format for the Open
SIP Phone. Default: 1 Jan, Mon
Polycom IP Phone
Time Display Format
Select the Time Display Format for the Open
SIP Phone. Default: 24Hr
Polycom IP Phone