258 Matrix ETERNITY NE System Manual
Enable SRTP?
Select the Enable SRTP? check box for secure
conversations over SIP. Default: Disabled
Matrix SPARSH VP710
SIP DiffServe/
ToS
Enter the desired SIP DiffServe/ToS to set the
Quality of Service (QoS) for SIP packets
Default: 26
Matrix SPARSH VP710
RTP DiffServe/
ToS
Enter the desired RTP DiffServe/ToS to set the
Quality of Service (QoS) for RTP packets.
Default: 46
Matrix SPARSH VP710
SIP Port
Enter the port on which the phone will listen for
SIP messages. This port is used as source port
in SIP messages.This port is also used to send
SIP messages to the remote peer. Default:
5060
Matrix SPARSH VP710
SIP TLS Port
Enter the port on which the phone will listen for
SIP messages transported over TLS. This port
is used as source port in SIP messages.This
port is also used to send SIP messages to the
remote peer. Default: 5061
Matrix SPARSH VP710
Min RTP Port
To define a range of RTP ports, configure the
minimum local RTP port. Default: 11780
Matrix SPARSH VP710
Max RTP Port
To define a range of RTP ports, configure the
maximum local RTP port. Default: 11800
Matrix SPARSH VP710
Allow HTTP
Select the Allow HTTP check box to enable
HTTP Web access. Default: Enabled
Matrix SPARSH VP710
HTTP Port
Enter the port number on which the HTTP
access is to be given. Default: 80
Matrix SPARSH VP710
Allow HTTPS
Select the Allow HTTPS check box to enable
HTTPS Web access. Default: Enabled
Matrix SPARSH VP710
HTTPS Port
Enter the port number on which the HTTPS
access is to be given. Default: 443
Matrix SPARSH VP710
Local Phone
Book
c
Select the type of contacts (Extension or/and
Global Directory Contacts) the phone must
download from the SARVAM UCS.
These will be stored in the phone’s Local
Phone Book. Default: Do not send
Matrix SPARSH VP710
Send Personal
Directory
Enable this check box if you want to allow
usage of Personal Directory. These contacts
will be stored in the phone’s
Local phone Book.
Matrix SPARSH VP710
To Next Page
Loading...
