292 Matrix ETERNITY NE System Manual
• Select the respective Copy to check boxes of the CO Trunks to which you want to apply the current CO
Trunk settings.
• Click OK.
You may also copy the parameter values of a specific link under current CO Trunk to the same link under any other
trunk page. To do so,
• Click the Copy icon besides the desired link.
The Copy page opens in another tab.
The Copy page displays the number and/or name of the current trunk in Copy from:. It also lists the
numbers and/or names of the trunks to which you can copy the trunk settings under Copy To/All:.
• Select the Copy to/All check box, to apply the link settings to the same link under all other Trunks.
OR
You may also apply the link settings to the desired Trunks only, by selecting the respective check boxes.
• Click OK.
To Next Page
Loading...
