Matrix ETERNITY NE System Manual 313
• Define the Working days, and the start and end time of the Working hours and Break hours for each
working day.
• Click Submit.
• Close the window.
See “Time Tables” to know more.
Send CLI
• To hide the subscriber number of the Mobile Port from being displayed to the called party, select the check
box Do not send CLI for Outgoing Calls.
This feature will work only if subscribed/supported by your mobile service provider.
Debug
• To initiate debug for the Mobile Port, select the Debug check box. Default: Disabled.
Forced Account Code
• To apply the Forced Account Code feature on the Mobile Trunk, select the Do not allow Outgoing Calls
without Account Code check box (Forced Account Code). Default: Disabled.
When you enable this check box, the system will prompt extension users to dial the Account Code
whenever they grab this trunk to dial out a number. The system will allow extension users to dial out
numbers only after they have dialed the Account Code or Name.
Account Codes feature must also be enabled in the Class of Service of extension users who are to be
allowed this feature. See “Account Codes” to know more about this feature.
Copy Parameter Values
After you have finished configuring this Mobile Trunk, you may configure the next Mobile Trunk. To do so,
• Click the tab of the next Mobile Trunk.
• Follow the same steps as described above to configure another Mobile Trunk.
OR
You may use the Copy button at the bottom of the page to apply the same Mobile Trunk settings you configured for
the current trunk to another Mobile Trunk. To do so,
To Next Page
Loading...
