386 Matrix ETERNITY NE System Manual
• configure the IPv6 Address/es and their respective Prefix Length in the Trusted IPv6 Address/es
table. The Prefix Length is a decimal value that indicates how many of the high-order contiguous bits of
the address comprise the prefix (the network portion of the address).
• enable the Allow Remote Login check box in the Trusted IPv6 Address/es table.
If you select All IP Address/es or Only Trusted IP Address/es option, click Generate Key.
The Key Generation window opens.
In Key Count, select the number of keys you wish to generate. You can generate maximum 10 keys.
Click Generate.
The number of keys you selected are generated and saved in a file. Using these keys you can remotely
login into the system.
For further assistance for Remote Login, along with this file contact Matrix Technical Support Team.
• In Allow Web Server Access, you can select All IP Address/es or Only Trusted IP Address/es. By default,
All IP Address/es is selected.
If you want to allow access to the Web Server from all IP Addresses, select All IP Address/es option.
If you want to allow access to the Web Server from specific IP Addresses only:
• select Only Trusted IP Address/es option.
• configure the IPv6 Address/es and their respective Prefix Length in the Trusted IPv6 Address/es
table. The Prefix Length is a decimal value that indicates how many of the high-order contiguous bits of
the address comprise the prefix (the network portion of the address).
• enable the Allow Web Server check box in the Trusted IPv6 Address/es table.
• In Allow Third Party Auto Configuration, you can select Don’t Allow, All IP Address/es or Only Trusted
IP Address/es. By default, Don’t Allow is selected.
If you want to allow third party auto configuration from all IP Addresses, select All IP Address/es option.
If you want to allow Third Party Auto Configuration from specific IP Addresses only:
• select Only Trusted IP Address/es option.
• configure the IPv6 Address/es and their respective Prefix Length in the Trusted IPv6 Address/es
table. The Prefix Length is a decimal value that indicates how many of the high-order contiguous bits of
the address comprise the prefix (the network portion of the address).
• enable the Allow Third Party Auto Configuration check box in the Trusted IPv6 Address/es table.
• By default, All IP Address/es option is selected for Black List SIP Extension IP Address:Port on
multiple Authentication Failure Attempts . If you do not want to include the Trusted IP Addresses,
select Except Trusted IP Address/es option.
If you select Except Trusted IP Address/es,
• configure the IPv6 Address/es and their respective Prefix Length in the Trusted IPv6 Address/es
table. The Prefix Length is a decimal value that indicates how many of the high-order contiguous bits of
the address comprise the prefix (the network portion of the address).
• enable the Black List SIP Extension IP Address:Port except check box for those IP Addresses
which you do not want to blacklist.
To Next Page
Loading...
