518 Matrix ETERNITY NE System Manual
• You can also configure this list by clicking the Allowed-Denied Numbers for sending SMS link under
SMS Routing.
Default: Disabled
• Configure the Allowed-Denied Numbers for receiving SMS list, if you want to allow or restrict receiving
messages from specific numbers. To do this,
• Select the Allowed-Denied Numbers for receiving SMS check box.
• Click on Allowed-Denied Numbers for receiving SMS and the Allowed-Denied Numbers for
receiving SMS table opens. You can configure up to 250 numbers.
• In the Allowed column, enter the numbers from which messages can be received and in the Denied
column, enter the numbers from which messages cannot be received.
• You can also configure this list by clicking the Allowed-Denied Numbers for receiving SMS link
under SMS Routing.
Default: Disabled
If you want to allow multi-part messages configure the following parameters:
• Select the Number of parts allowed for sending SMS from the list. Default:1
• If the SMS length is more than number of parts allowed, you can select either Ignore remaining
part of the SMS or Do not send SMS and send error report to sender. Default: Do not send SMS
and send error report to sender.
• If you select Ignore remaining part of the SMS, you can select the Send error report to sender
when SMS length is more than allowed parts check box, if you want to send an error report to the
sender.
• If you enable Send error report to sender when SMS length is more than allowed parts, enter the
message you want to send to the sender in the email in Reply error report as an Email to sender
containing text. Default text: Some texts of message are ignored as length of mail is more than
allowed characters.
• Configure the Minimum time delay between sending two consecutive SMS (sec) as supported by the
network. Default: 05.
• Click Submit.
To Next Page
Loading...
