Matrix ETERNITY NE System Manual 549
• Enable CTI Server.
• Enter Server Listening Port. When the CTI Link is to be established between Matrix TSP and
SARVAM UCS, then the binding will be done on this port.
Make sure the same port is configured as the Listening Port of System- SARVAM UCS in the Client. For
more details, see Matrix TSP User Guide.
• Enable Make Call Ring on SLT, if you want the SLT to ring when an outgoing call is initiated from the
CTI Client.
If Extended IP Phone is connected as an extension, the speaker of the phone is automatically turned on
when an outgoing call is initiated from the CTI Client.
• Select the Debug check box to log the CTI Server events.
• Click Resources, to view the details of the CTI events and activities. These details are used by the
Technical Team only.
• Click Status. It displays the following details of each Client:
• IP Address: It displays the IP Address of the Client in which you have installed the Matrix TSP.
• Port: It displays the Port of the Client on which the CTI binding with the Server is established.
• TSP Version: It displays the Software Version of the Matrix TSP installed in the Client.
• Status: It displays the status of the Client and Server binding, that is whether the link is up or down.
To Next Page
Loading...
