Matrix Telecom ETERNITY NE - Page 595

Matrix ETERNITY NE System Manual 585
• Enter Account Code.
• Speech will be resumed.
To enter Account Code Number when Forced Account Code check box is enabled:
For Extended IP Phone Users
• Press DSS Key assigned to Account Code by Number.
OR
• Dial 1058
• Enter the Account Code Number.
• You get dial tone.
• Dial Trunk Access Code followed by the number of the client.
If you dial the Trunk Access Code to grab a trunk, without dialing the Forced Account Code, you will get an
error tone. Go ON-hook and then go OFF-hook. Now follow the same steps in the sequence mentioned
above.
For SLT Users
• Go OFF hook.
• Dial Account Code first.
• Dial Trunk Access Code followed by the number of the client.
If you dial the Trunk Access Code to grab a trunk, without dialing the Forced Account Code, you will get an
error tone. Go ON-hook and then go OFF-hook. Now follow the steps in the sequence mentioned above.
Dialing Account Code by Name
Dialing Account Code by Names is possible only if your phone is an Extended IP Phone.
To enter Account Code Name before making the call:
• Press DSS Key assigned to Account Code by Name.
OR
• Dial 1059.
• Enter the initial letter of the client's name.
The Account Name List will be displayed on your Extended IP Phone, alphabetically with the
corresponding account codes.
• Scroll to select the desired client name and press Enter key.
• Dial Trunk Access Code.
• Dial the client's number.
To enter Account Code Name during the call:
• Press ‘Transfer’ Key.
• Press DSS Key assigned to Account Code by Name.
OR
• Dial 1059.
• Dial the initial letter of the client's name.
The Account Name List will be displayed on your Extended IP Phone, alphabetically with the
corresponding account codes.
• Scroll to select the desired client name and press Enter key.