Matrix ETERNITY NE System Manual 623
To cancel Auto Call Back on No Reply:
• Press the 'Call Back' Key / DSS Key assigned to Auto Call Back again.
OR
• Dial 102.
• You get confirmatory message "Auto Call Back Canceled" on the phone's display. The LED of the DSS
Key will be turned off.
• Go idle.
For SLT Users
To set Auto Call Back on No Reply:
• On Ring Back Tone
•Dial 2.
• You get confirmatory tone
• Replace handset or you get dial tone after 3 seconds.
To cancel Auto Call Back on No Reply:
• Pick up the handset.
• Dial 102.
• You get confirmatory tone.
• Replace handset or you get dial tone after 3 seconds.
If you hear an error tone while setting an Auto Call Back request, it is likely that the system already has 50
pending requests and is unable to accept yours.
To Next Page
