Matrix Telecom ETERNITY NE - Page 632

622 Matrix ETERNITY NE System Manual
Auto Call Back on Busy
For Extended IP Phone Users
To set Auto Call Back on Busy:
• Press the 'Call Back' Key on Busy Tone or press the DSS Key assigned to Auto Call Back on Busy Tone.
OR
• Dial 2 on Busy Tone.
• You get confirmatory message "Auto Call Back Set" on the phone's display. The LED of the DSS Key will
be turned on.
• Go idle.
To cancel Auto Call Back on Busy:
• Press the 'Call Back' Key again or press the DSS Key assigned to Auto Call Back again.
OR
• Dial 102
• You get confirmatory message "Auto Call Back Canceled" on the phone's display. The LED of the DSS
Key will be turned off.
• Go idle.
For SLT Users
To set Auto Call Back on Busy:
• On Busy Tone.
•Dial 2.
• You get confirmatory tone
• Replace handset.
To cancel Auto Call Back:
• Pick up the handset.
• Dial 102.
• You get confirmatory tone.
• Replace handset.
Auto Call Back on No Reply
For Extended IP Phone Users
To set Auto Call Back on No Reply:
• Press the 'Call Back' Key / DSS Key assigned to Auto Call Back on Ring Back Tone.
OR
• Dial 2 on Ring Back Tone.
• You get confirmatory message "Auto Call Back Set" on the phone's display. The LED of the DSS Key will
be turned on.
• Go idle.