Matrix ETERNITY NE System Manual 627
To cancel Auto Redial:
• Press the DSS Key assigned to ‘Auto Redial’ function again.
Using Command:
To set Auto Redial:
• When the external number you are trying is busy,
• Go ON-Hook on Busy Tone.
• Dial 17.
• Go Idle or you get dial tone after 3 seconds.
To cancel Auto Redial:
• Pick up the handset.
• Dial 1070.
• Go Idle or you get dial tone after 3 seconds.
For SLT Users
To set Auto Redial
• When the external number you are trying is busy,
• Go ON-Hook on Busy Tone.
• Dial 17.
• Replace handset.
To cancel Auto Redial:
• Pick up the handset.
• Dial 1070.
• Replace handset.
To Next Page
Loading...
