Matrix ETERNITY NE System Manual 57
Connecting SPARSH VP510 as Extended SIP Extension
You are recommended to complete the following steps before connecting the Matrix Extended IP Phone to
ETERNITY NENX:
• Decide the location of the Extended IP Phone—within the same network or outside—according to your
installation scenario.
• Log into the web-browser Jeeves. Read the topic “System Configuration using the Web-based GUI”.
• Configure DHCP Server on the “Network Parameters” page under Basic Settings of Jeeves.
If you want to use the DHCP Server on your LAN for assigning IP Address to the Extended IP Phone,
select DHCP option 224 and Data Type as ‘String’ and program the Ethernet Port IP Address /Domain
Name and SPARSH Port in the format “Ethernet IP Address: SPARSH Port” in your LAN DHCP Server.
• Assign an extension number to the Extended IP Phone on the “Extension and Feature Codes” page under
Basic Settings of Jeeves.
• You must configure the necessary parameters in ETERNITY so that SPARSH VP510 can register as a SIP
Extension. For instructions, see “SIP Extensions” under Basic Settings.
You can also connect DSS532, the DSS Console with SPARSH VP510. To connect, follow the instructions given in
“Installing DSS532 with SPARSH VP510”.
Now, follow the steps described below to install the Extended IP Phone.
• Unpack the SPARSH VP510 box and verify package contents
9
.
• You can mount the phone on a wall or on the desk.
• When you mount SPARSH VP510 on a wall,
• Use the mounting template to drill holed of appropriate size and distance.
• Fix the screw grips in the holes you drilled.
• Fix two screws in the holes on the wall, ensuring that they are aligned with the Keyhole Slots 1 and 2 of
SPARSH VP510. The screws should protrude from the wall to fit into the Keyhole Slots.
9. See “Packing List” in the Appendix topic.
Keyhole
Slot 1
Keyhole
Slot 2
To Next Page
Loading...
