664 Matrix ETERNITY NE System Manual
Similarly, when there are Special Tariffs offered on certain days, the system will check the Discounted Pulse Rate
Schedule and the Discounted Pulse Rate Table.
The days on which the special rates are to be applied must be configured in the Discounted Pulse Rate Schedule.
The duration and cost of the First unit and the Additional units must be configured in the Discounted Pulse Rate
Table according to the Time Zones.
How to configure
To be able to use Call Cost Calculation, you must do the following:
• Define the Unit and Service Charge on the basis of which call cost is to be calculated.
• Assign Call Cost Calculation Pulse Rate Option and the Call Cost Calculation Schedule on the trunks on
which you want to apply this feature.
• Configure the Pulse Rate Types for the Pulse Rate Option you assign to the trunk.
• You may configure different Pulse Rate Types:
• For Normal Days configure the pulse rate in the Normal Pulse Rate Table.
• For Special days configure the pulse rate in the Discounted Rate Table. If you configure the Discounted
Pulse Rate Table, you must also configure the Discounted Pulse Rate schedule.
• Configure the Area Code Table.
Configuring Call Cost Calculation using Jeeves
To configure call cost calculation parameters,
• Login as System Engineer.
• Under Advanced Settings, click Call Cost Calculation.
Service Charge
By default, no Service Charge is applied on call cost by the system. Service Charge on call cost is generally applied
in Hotels and other organization which charge users for the calls made by them.
If you want to apply Service Charge,
To Next Page
Loading...
