Matrix Telecom ETERNITY NE - Page 701

Matrix ETERNITY NE System Manual 691
• Enter the Destination Phone Number.
• Scroll to select the desired Call Forward Type:
• All Calls.
• If Busy.
• If No Reply.
• If Busy or No Reply.
• Dual Ring.
• Press 'Enter' key.
• Enter Destination Phone Number
110
/Voice Mail
111
/Department Group.
• You get a confirmation tone and a text message for the Call Forward type set.
•Go Idle.
To cancel Call Forward set for an extension
• Press the DSS Key assigned to 'Call Forward-Remote'.
OR
•Dial 1072-006.
• Enter Extension Number.
• Scroll to select 'Cancel'.
• Press 'Enter' key.
• You get a confirmation tone and text message for Call Forward canceled.
• Go Idle.
For SLT Users
To set Call Forward-Remote
• Lift handset.
•Dial 1072-006.
• Enter Extension Number.
• Dial 1 for All Calls
• Dial 2 for If Busy
• Dial 3 for If No Reply
• Dial 4 for If Busy or No Reply
• Dial 5 for Dual Ring
• Dial destination Phone Number/Voice Mail.
• You get confirmation tone.
• Replace handset.
To cancel Call Forward Remote
• Lift the handset.
•Dial 1072-006.
• Dial the Extension Number.
•Dial 0.
• You get confirmation tone.
• Replace handset.
110. If call is to be forwarded to an extension of SARVAM UCS, dial the extension number. If call is to be forwarded on an external num-
ber, dial Trunk Access Code, then dial the external phone number and terminate the command with #*.
For users world wide, Trunk Access Code (TAC) for dialing external numbers are: 0, 5. For users in USA, TAC for dialing external
numbers are: 9, 5.
111. If call is to be forwarded on voice mail, dial the Access Code for the Voice Mail. The default Access Code is 390.