Matrix ETERNITY NE System Manual 747
Assigning CoS to Extensions
• Prepare a list of SLT and SIP extensions by their names/numbers.
• Read the list of features supported on the extensions (see above Table 'Default CoS Groups for
Features').
• Against each extension name/number on the list, write the features needed for the Day and Night/Break.
You will notice that the features needed by many extensions are identical.
• List the common features to be allowed to and features to be denied to all SLT and SIP extensions.
• Are there any other features, in addition to those on the common list, which you want to allow to select
extensions?
• If yes, extend the common list you prepared by adding the features to be allowed to the select extensions.
• Now, to configure the CoS features to be allowed or denied to extensions, go to “Basic Settings” of Jeeves.
• Click the extension settings link for SLT and SIP Extension.
• Select the desired extension number.
Privacy from Built-In Auto Attendant
Privacy from Interrupt Request, Barge-In and
DND-Override
Privacy - Raid
Raid
Return Call to Original Caller (RCOC)
Room Monitor
SA Extension
SA Mode
Selective Port
Trunk Call Waiting
Trunk Reservation
Trunk-Trunk Transfer
a. Basic Features includes: Internal Call, Call Hold, Call Toggle, Call Transfer, Depart-
ment Call, Operator Access, Redial, Mute.
Feature
Allowed During
Day Night/Break
To Next Page
Loading...
