Matrix Telecom ETERNITY NE - Page 773

Matrix ETERNITY NE System Manual 763
To temporarily leave multiparty conference
• While in Conference, press the ‘Conference’ Key.
• The Multiparty Conference menu appears on the LCD.
• Select the option ‘Leave Temporary’ and press the Enter Key.
OR
• Press the DSS key assigned to Temporary Leave Conference/Rejoin Conference.
To rejoin multiparty conference
• Press the ‘Conference’ Key.
OR
• Press the DSS key assigned to ‘Temporary Leave’ Conference/Rejoin Conference.
To remove a party from multiparty conference
• While in Conference, press the ‘Conference’ Key.
• The Multiparty Conference menu appears on the LCD.
• Select the option ‘Remove Party from Conf’
• The LCD displays the numbers of all the participants.
• Select the number of the participant you want to remove and press the Enter Key.
• The selected participant is disconnected.
To permanently leave from the multiparty conference
• While in Conference, go ON-Hook.
To cancel multiparty conference
• While in Conference, press the ‘Conference’ Key.
• The Multiparty Conference menu appears on the LCD.
• Select the option ‘Terminate Conference’ and press the Enter Key.
OR
• Press the DSS key assigned to Terminate Conference.
• All the participants will get an Error Tone and the system resource occupied by the conference will be
freed.
For SLT Users
To initiate multiparty conference
• Lift handset.
• Dial number of party 1.
• Speech with party 1.
• Dial Flash.
• Dial number of party 2.
• Speech with party 2. Dial Flash-*3. A 3-way speech is established.
• Dial Flash.
• Dial number of party 3.
• Speech with party 3. Dial Flash-*3. A multiparty conference is established.