Matrix ETERNITY NE System Manual 771
To include a participant in Dial-In conference
• After initiating the conference, or when in speech,
• Dial Flash.
• Dial the number of the desired party.
• Speech with party, dial Flash-*3.
To temporarily leave from the Dial-In conference
• While you are all in speech, dial Flash-191.
To rejoin the Dial-In conference
• Go OFF-Hook.
• Dial Flash-191.
To permanently leave from the Dial-In conference
• Go ON-Hook.
To cancel a Dial-In conference
• While you are all in speech, dial Flash-190.
SLT users cannot Remove any participant from the Dial-In Conference.
Dial-In Conference using DISA
To schedule a Dial-In Conference
• Dial a DISA enabled Trunk
• Dial DISA Login Code 1079-Extension Number-User Password, if PIN Authentication is required.
• After DISA Login beeps, dial *191-Conference Number-Conference Password.
To initiate or join a Dial-In Conference
• After DISA Login beeps, dial *192-Conference Number-Conference Password.
To include a party midway of the Conference
• Dial #2.
• You get dial tone.
• Dial the extension number to be included in the conference. You get Ring Back Tone.
• When you are in speech with the extension user, dial #2.
• You get feature tone, and the extension user is played music on hold.
• Dial *3. Both of you are now included in the conference.
To temporarily leave the Conference
• Dial Flash-191.
To rejoin the Conference
• Go Off-Hook Dial 191.
To Next Page
Loading...
