Matrix Telecom ETERNITY NE - Page 849

Matrix ETERNITY NE System Manual 839
• Enter Phone Menu.
• Enter the Extension Number for which you want to set Dynamic Lock.
• Select the option 'Change Toll Ctrl. Level'
• Press Enter key.
• Scroll to select the desired Toll Control Level:
• Toll Control Level 0
• Toll Control Level 1
• Toll Control Level 2
• Toll Control Level 3
• Press 'Enter' key.
• You get confirmation message and tone.
For SLT Users
To set Dynamic Lock-Manual
• Pick up the handset.
• Dial 1072-002, you get feature tone.
• Dial Extension Number, you get feature tone.
• Dial 2, the code for 'Change Lock Timer'.
• Dial 00.
• You get confirmation tone.
• Replace the Handset or you get dial tone after 3 seconds.
To set Dynamic Lock-Automatic
• Pick up the handset.
• Dial 1072-002, you get feature tone.
• Dial Extension Number, you get feature tone.
• Dial 2, the code for 'Change Lock Timer'.
• Dial the number of Minutes you want to set the Timer.
• You get confirmation tone.
• Replace the Handset or you get dial tone after 3 seconds.
To change Dynamic Lock Level
• Pick up the handset.
• Dial 1072-002, you get feature tone.
• Dial Extension Number, you get feature tone.
• Dial 1, the code for 'Change Toll Control Level'.
• Dial 0 for Level 0
• Dial 1 for Level 1
• Dial 2 for Level 2
• Dial 3 for Level 3
• You get confirmation tone.
• Replace the Handset or you get dial tone after 3 seconds.
142. The feature 'SA Extension' must be enabled in the “Class of Service (CoS)” of the extension from which this code is being dialed. If
the feature ‘SA Mode’ is enabled in the Class of Service of this extension, the extension user will be prompted for the SA pass-
word.