Matrix Telecom ETERNITY NE - Page 848

838 Matrix ETERNITY NE System Manual
To set Dynamic Lock Level
• Lift the handset.
• Dial 141-User Password-Toll Control Level.
• Dial 0 Level 0.
• Dial 1 for Level 1.
• Dial 2 for Level 2.
• Dial 3 Level 3.
• You get confirmation tone.
• Replace handset.
Changing Toll Control Level for an Extension
For Extended IP Phone Users
To set Dynamic Lock-Manual
• Press DSS key assigned to Dynamic Lock.
OR
• Dial 1072-002
140
.
OR
• Enter Phone Menu.
• Enter the extension number for which you want to set Dynamic Lock.
• Select the option 'Change Lock Timer'.
• You get the following prompt: 'XX Minutes'.
• Enter 00
• You get the text message <Lock Timer = 00 Minutes> and confirmation tone.
To set Dynamic Lock-Automatic
• Press DSS key assigned to Dynamic Lock.
OR
• Dial 1072-002
141
.
OR
• Enter Phone Menu.
• You get a text message 'Enter Room/Phone Number'.
• Enter the extension number for which you want to set Dynamic Lock.
• Select the option 'Change Lock Timer'.
• You get the following prompt: 'XX Minutes'.
• Enter the desired number of minutes (max. 99)
• You get the text message <Lock Timer = xx Minutes> and confirmation tone.
To set Dynamic Lock Level
• Press DSS key assigned to Dynamic Lock.
OR
• Dial 1072-002
142
.
OR
140. The feature 'SA Extension' must be enabled in the “Class of Service (CoS)” of the extension from which this code is being dialed. If
the feature ‘SA Mode’ is enabled in the Class of Service of this extension, the extension user will be prompted for the SA pass-
word.
141. The feature 'SA Extension' must be enabled in the “Class of Service (CoS)” of the extension from which this code is being dialed. If
the feature ‘SA Mode’ is enabled in the Class of Service of this extension, the extension user will be prompted for the SA pass-
word.