Matrix Telecom ETERNITY NE - Page 847

Matrix ETERNITY NE System Manual 837
• You get the prompt: <Lock Timer = XX Minutes>.
• Enter 00
• You get the Text message <Lock Timer = 00 Minutes> and confirmation tone.
To set Dynamic Lock-Automatic
• Press DSS Key assigned to Dynamic Lock.
OR
• Dial 142.
OR
• Enter Phone Menu by pressing 'Enter' key.
• You get the prompt <Enter User Password>
• Enter your User Password.
• You get the prompt: <Lock Timer = XX Minutes>.
• Enter the desired number of minutes (max. 99 minutes).
• You get the Text message <Lock Timer = xx Minutes> and confirmation tone.
To set Dynamic Lock Level
• Press DSS Key assigned to Dynamic Lock.
OR
• Dial 141.
OR
• Enter Phone Menu by pressing 'Enter' key.
• You get the prompt: <Enter User Password>.
• Enter your User Password.
• Select the desired Toll Control Level:
• Toll Control Level 0
• Toll Control Level 1
• Toll Control Level 2
• Toll Control Level 3
• Press Enter key.
• You get the text message 'OK!' and a confirmation tone.
Change your User Password first, before you use this feature. If you are still working with the default User
Password, the system will prompt you to 'Change User Password' when you attempt to set Dynamic Lock.
For SLT Users
To set Dynamic Lock-Manual
• Lift the handset.
• Dial 142-User Password-00.
• You get confirmation tone.
• Replace handset.
To set Dynamic Lock-Automatic
• Lift the handset.
• Dial 142-User Password-Minutes (max. 99 minutes)
• You get confirmation tone.
• Replace handset.