846 Matrix ETERNITY NE System Manual
• Select the Extensions for the Emergency Reporting Group. These may be a SLT, SIP extension, Virtual
extension or Voice Mail Auto Attendant Menu.
• For each extension you have selected, set the Ring Timer. This timer defines the time for which the
extension, on which the call lands, should ring. Default: 015 seconds.
• For each extension you have selected, you may set Continuous Ring, if you want the extension to ring till
the incoming call is answered. Default: Disabled.
When Continuous Ring is selected, the first extension in the Emergency Reporting Group group you have
created will continue to ring, even as the system hunts for other extensions in the group to land the call. If
the call still remains unanswered, the system will return the call to the first extension once again. This
check box has no relevance, if there is only one extension in the Emergency Reporting Group.
• Enable Rotation, if you have selected more than one extension in the Emergency Reporting Group.
Default: Enabled.
When you enable Rotation, each new call lands on the subsequent extension
143
in the group next to the
one that received the last call. This ensures equal distribution of incoming calls to all the destination
extensions in the Emergency Reporting Group.
Rotation has no relevance if the Emergency Reporting Group has only one member extension.
• By default, When member rejects the call, place the call again is disabled. Therefore, if any
extension user rejects an incoming call, the system will not place the same call on this extension again
while checking the routing group to land the call. You may enable this check box, if required.
If this check box is disabled and you have selected the Continuous Ring check box, the extension that
rejects the call stops ringing while the system hunts for other extensions in the routing group to land the
call.
143. The extension next to the one that received the previous call.
To Next Page
Loading...
