866 Matrix ETERNITY NE System Manual
When the phone is in idle state,
• Press the Down key to access the Network Settings.
• Press the Up key , if you wish to change the Ringtone.
Navigating the Phone Menu
To navigate the menu,
• Press on Enter key when the phone is idle.
• Scroll by tapping the Up/Down Navigation Key to reach the desired Menu option.
• Press on Enter key to select the desired Menu option.
• Scroll by tapping on the Up/Down Navigation Key to reach the desired sub-menu option.
• Press on Enter key to select the desired sub-menu option.
To exit menu,
• Press Cancel key.
Or
• Go ON-Hook.
Call Waiting Indication
During an on-going call, if there is another incoming call, an indication will be provided to you for the waiting call.
The call waiting indication depends on the Call Waiting Tone (for SPARSH VP248/VP310/VP510) option you
select in General Parameters under SIP Extensions. See “SIP Extensions” for instructions.
Connecting SPARSH VP310
For detailed instruction to connect SPARSH VP310, see “Connecting SPARSH VP310 as Extended SIP Extension”
in “Connecting SIP Extensions”.
Configuring SPARSH VP310
For detailed instructions on how to configure SPARSH VP310, see “Configuring Matrix SPARSH VP310”.
Operating SPARSH VP310
Please refer the EON48_310_SPARSH VP248_310 User Guide for instructions on operating the features of
SARVAM UCS.
Phone Settings To customize settings of the phone such as Speech and Ringer Controls, LCD Display
settings (Brightness and Contrast, Backlight ON/OFF), Headset Connectivity, Call
Answering Mode (manual/auto answer).
Menu option Description
To Next Page
