Matrix ETERNITY NE System Manual 873
A few of these Feature keys are equipped with an LED to indicate the status of the feature assigned to it. You may
re-assign other features to these keys. We recommend you to assign those features that require LED indication to
the Feature keys equipped with an LED.
Not all features require LED indication. For example, the feature Call Pick-Up does not require an LED. So when
you assign this feature to a feature key, the LED of the key remains inactive, when Call Pick-Up is accessed.
Feature like Auto Redial requires an LED to show that it has been set or canceled. So, the LED of the Feature key
to which the Auto Redial feature has been assigned will glow Blue, when Auto-Redial is set, and the LED is turned
off when the feature is canceled.
DSS (Direct Station Selection) Keys
There are 12 DSS Keys which can be used for quick access to different features and facilities. For example, to dial
an extension number at one key press, just press the DSS key assigned to that extension and the call will be
placed automatically. Features/facilities assigned to these keys can be changed by the System Engineer.
These Keys have dual color LEDs - blue and red. For instructions on programming these keys see, “Phone Key
Settings” under “Configuring Matrix SPARSH VP330”.
For detailed information about SPARSH VP330, refer to the SPARSH VP330 User Guide.
Connecting SPARSH VP330
For detailed instruction to connect SPARSH VP330, see “Connecting SPARSH VP330 as Extended SIP Extension”
in Connecting SIP Extensions.
Configuring SPARSH VP330
For detailed instructions on how to configure SPARSH VP330, see “Configuring Matrix SPARSH VP330”.
Operating SPARSH VP330
Refer the SPARSH VP330 User Guide for instructions on operating the features of SARVAM UCS.
To Next Page
Loading...
