Matrix ETERNITY NE System Manual 917
Set/Cancel Hotline by Extension Users
For Extended IP Phone Users
To set Hotline on an Extension / Department Group
• Press DSS key assigned to Hotline.
• Scroll to select ‘Set Hotline Station (extension) / Department’, press enter key.
• Enter Extension/ Department Group Number.
OR
• Dial 151-Extension Number / Department Group Number.
To set Hot Outward Dialing for Trunk
• Press DSS key assigned to Hotline.
• Scroll to select ‘Set Hotline Outgoing Trunk’, press enter key.
• Enter TAC.
OR
• Dial 152-TAC.
To set Hot Outward Dialing for External Number
• Press DSS key assigned to Hotline.
• Scroll to select ‘Set Hotline Outgoing Trunk: Ext Num’, press enter key.
• Enter TAC.
• Enter External Number #*
OR
• Dial 153-TAC-External Number#*
You cannot set Hotline and Hot Outward Dialing on the same extension at the same time.
To set Hotline Timer
• Press DSS key assigned to Hotline.
• Scroll to select ‘Set Hotline Timer’, press enter key.
• Enter Hotline Timer:000-255 seconds.
OR
• Dial 154-seconds (000-255).
The default value of Hot Line Timer is 3 seconds.
To Cancel Hotline / Hot Outward Dialing
• Press DSS key assigned to Hotline.
• Scroll to select ‘Cancel Hotline’, press enter key.
OR
• Dial 150.
The cancellation code must be dialed from the dial tone. You have to be very quick in dialing the
cancellation code, if the delay in the Hotline Timer is set to 1 or 2 seconds.
To Next Page
Loading...
