918 Matrix ETERNITY NE System Manual
For SLT Users
To set Hotline on an Extension / Department Group
• Dial 151-Extension Number / Department Group Number
To set Hot Outward Dialing (For Trunk)
• Dial 152-TAC
To set Hot Outward Dialing with Number
• Dial 153-TAC-External Number#*
To set Hotline Timer
• Dial 154-seconds (000-255)
To Cancel Hotline / Hot Outward Dialing
• Dial 150.
When you set the Hotline Timer to ‘00’ seconds (for immediate Hotline), you will not be able to dial any
digits, not even the feature code to Cancel Hotline.
If you have set Immediate Hot Outward Dialing for a Trunk or External Number, you will not be allowed to dial any
feature code, not even the feature code to cancel Hot Outward Dialing. However, if you need to cancel, you must
follow the steps described below.
• Go OFF-Hook.
You get the CO network Dial Tone.
• Dial by Digit.
You will hear Pause/Silence.
• Wait for the duration of the Trunk Inter Digit Timer.
You will hear Pause/Silence.
• Press Flash.
You will hear the Feature Tone.
• Dial the code to change the Hot Outward Dialing Timer (154) and change the duration of the timer.
OR
Dial the access code to cancel the Hot Outward Dialing (150).
You get Confirmation Tone.
• Go ON-hook.
You get the return ring of the trunk.
• Go OFF-Hook again.
You get connected to the held trunk.
• Go ON-Hook.
To Next Page
Loading...
