EasyManua.ls Logo

Matrix Telecom ETERNITY NE - Page 945

Matrix Telecom ETERNITY NE
1370 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Matrix ETERNITY NE System Manual 935
Refer the following table to understand how you can configure the Numbers.
Configuring Service Provider based LCR
In Service Provider based LCR, whenever a number is dialed out, the system ignores the area code, and
starts checking the numbers in the 'Service Provider based LCR table and routes the call according to the
lowest cost trunk configured for that number. For this, you must configure the two parameters Area Code
and Ignore Digit Count in the Area Code Table.
On a sheet of paper make a table for Service Provider based LCR.
As you can see, the Service Provider based LCR Table is similar to the Number based LCR table.
You can configure as many as 99 different numbers which are stored against Index numbers from 1 to 99.
The number strings may be the complete telephone number, a truncated phone number or the first digit of
the phone number. The number can be a maximum of 64 characters (Digits + Wildcards). Valid characters:
0 to 9, *, #, X, T, Comma [,], Hyphen [-], Caret [^ ]. See “Wildcard Characters” to know the various number
patterns you can use.
For each number string that you enter against an Index number, you must also specify the Area Code and
the Ignore Digit Count.
Numbers Description
1XX Allows you to dial any number in a range from 100 to 199.
[2-5]XX Allows you to dial any 3 digit number in a range from 200-599.
[2,3,8]XX
Allows you to dial any 3 digit number in the range from 200-299, 300-399, 800-
899.
[2-9]XXXXXX Allows you to dial any 7 digit number in the range from 2000000-9999999.
23[^2]1
Allows you to dial a 4 digit number: 2301, 2311, 2331, 2341, 2351, 2361, 2371,
2381, 2391.
2630[500-550] Allows you to dial a 7 digit number in the range from 2630500-2630550.
[^6-7]X
Allows you to dial a 2 digit number in the range from 00 to 99 except the numbers
from 60 to 79.
1234 Allows you to dial 1234 number only.
011T
Allows you to dial any number starting with 011. The number must be of minimum
3 digits and maximum digits must be as configured for the port.
Index
No.
Number
Area
Code
Ignore
Digit Count
Cost Factor
Preference 1 Preference 2 Preference 3 Preference 4
013080305060102
026022301010204
:: :
99 2 03852 5 01 02 01 02

Table of Contents