Matrix ETERNITY NE System Manual 967
•In Number String, enter the strings the system should consider as command when the special key on
the SLT is pressed.
•In Access Codes, enter the strings sent by the SLT on pressing the special function key.
For example, if the SLT sends the string ‘*53’ to SARVAM UCS, when the function key for Alarms is
pressed, enter the string 163 (the feature access code for Voice-guided Alarms) in Number String, and
enter the string *53 in the corresponding Access code field.
The Access Code that you assign here in Macros must not conflict with any other Access Codes in the
Dial Phase. See “Access Codes”.
• Click Submit.
To Next Page
