Panasonic HMWIN - Page 102

Element Description
Dump information Variables
Variable Name Description Data Type
Dump Error Message Return error message if any error occurs during
the dump operation
string
read only
Dump Archive Status 0 = initial default state
1 = operation triggered
2 = operation complete successfully
3 = operation completed with errors
int
read only
Dump Recipe Status 0 = initial default state
1 = operation triggered
2 = operation complete successfully
3 = operation completed with errors
int
read only
Dump Trend Status 0 = initial default state
1 = operation triggered
2 = operation complete successfully
3 = operation completed with errors
int
read only
Reset Recipe Status 0 = initial default state
1 = operation triggered
2 = operation complete successfully
3 = operation completed with errors
int
read only
Restore Recipe
Status
0 = initial default state
1 = operation triggered
2 = operation complete successfully
3 = operation completed with errors
int
read only
Network Variables0
Variable Name Description Data Type
Gateway Gateway address of the main Ethernet interface
of HMI
string
read only
IP Address IP address of the main Ethernet interface of
HMI
string
read only
Mac ID MAC ID of the main Ethernet interface of HMI string
read only
Network Adapter JSON string that can be use to read or update string
100
HMWIN Studio |User Manual|v206 (2017-06-30) |EN|© 2014-2017 Panasonic Electric Works Europe AG
Default variables