PerkinElmer LabChip GX - Adding New Users

Software Security 118
V4.2 LabChip GX User Manual PerkinElmer
Adding New Users
Each person who uses the LabChip GX should have a unique
LabChip GX user account.
To add a new user:
1 On the LabChip GX Main Window, select Security  User and
System Administration. The User Administration Window
opens.
2 Click the Create User button.
3 Type the desired Username.
4 Type the First, Middle, and Last Name for user.
5 Type the user’s Position if desired.
6 Select the Access Level for the user. The Access Level
controls which rights the user has. The following access levels
are available:
• Restricted User
•Operator
• Supervisor
• Administrator
•Service
7 Type the desired User Password*.
8 Type the User Password again.
9 Select whether the user can perform a signature.
10 Select whether the user can Accept/Reject/Lock data files.
11 Select whether the user can Unlock data files.
12 Click the Save button.
* Passwords must be at least 5 characters long and must contain at
least one uppercase letter and at least one number.