Software Reference 267
V4.2 LabChip GX User Manual PerkinElmer
Define Access
Use the Define Access Tab to assign the desired rights to each
access level. These rights control the actions each user is permitted
to perform in the LabChip GX software. The Define Access tab is
not available while an assay is running.
Figure 127. User Administration Window - Define Access
The Define Access tab displays a column for each access level
(Administrator, Supervisor, Operator, Restricted User, and Service).
Select Enabled for each right to be allowed for an access level, or
select Disabled for each right not allowed for an access level.
The table below describes the function of each Access Right.
Access Right Function
User Administration If enabled, allows access to the User Administration Window
to add and edit users, set access rights, and set policies.
Run Assay If enabled, allows users to run assays and save the new data
files that are created by the run. Users are not permitted to
save changes to existing data files.
Save Existing Data
File
If enabled, allows users to save changes to existing data
files.
Save Workspace If enabled, allows users to save new and existing
workspaces. If Save Existing Data Files is not selected,
users can only save workspaces where the data files have
not changed.
Plate Editor If enabled, allows users to add or edit plate dimensions in the
Plate database.
To Next Page
Loading...
Need help?
General
