Software Reference 240
V4.2 LabChip GX User Manual PerkinElmer
Finished Window
The Finish Window is the last window to display in the Robot Teach
Wizard. Click the Finish button to save changes to the Reference
position. (The software prompts you to save changes to the plate
information when you exit the Plate Information Window. If you click
the Yes button, the plate information is saved even if you click the
Cancel button in the Robot Teach Wizard.)
Figure 107. Finished Window
The Finished Window contains the following options and buttons:
Option/Button Function
Back button Displays the Verify Positions Window.
Finish button Saves the changes to the reference position and closes the
Robot Teach Wizard.
Cancel button Closes the Robot Teach Wizard without saving changes to any
positions.
To Next Page
Loading...
Need help?
General
