Software Reference 252
V4.2 LabChip GX User Manual PerkinElmer
Output Tab
The Output tab on the Start Run Window specifies the location,
name, and export settings for plate data files (*.gxd) created during
the run.
The data file name can include a specific prefix, the date, the time,
and the plate barcode. For example, including the prefix
LabChip_GX, the barcode, the date, and the time would create file
names such as LabChip_GX_<Barcode>_2008-04-24_10-23-48.
NOTE
If you choose not to use the time of the run as part of the data file
name, the LabChip GX software automatically appends _1, _2, etc.,
for each subsequent run on the same day.
Figure 117. Start Run Window - Output Tab
Data Path
Specifies the location where the data files will be saved.
21 CFR Part 11 option not installed: The default location is
C:\Program Files\Caliper Life Sciences\LabChip GX\Data\. Click the
Browse button to choose a different location. Click the Default
button to reset the text box to the default directory.
21 CFR Part 11 option installed: The default location is
C:\Program Files\Caliper Life Sciences\CDR\. Click the Browse
button to choose a folder in the CDR. Click the Default button to
reset the text box to the default directory.