PerkinElmer LabChip GX User Manual

Operation 35
V4.2 LabChip GX User Manual PerkinElmer
If the 21 CFR Part 11 option is installed, saving Workspace files
does not require permission to save data files unless the data files
in the workspace have been modified.
Selecting Wells using a Sample Names File
The wells to be sampled during the run can be selected using a
Sample Names file. When using a Sample Names file to select the
wells, only wells with an entry in the Sample Names file are
selected for sampling. The format must match the file format
described in “Sample Name File Format (.CSV Format)” on
page 65.
The Sample Names file used to select the samples contains one
row for each well to be sampled, and does not contain rows for
wells that are not sampled.
Using the Sample Names file in Figure 4 to select the wells in the
run will select wells A1, A5, A11, A12, B1, B2, F5, and F6 for
sampling.
Figure 4. Sample Names File for Selecting Samples
Figure 5. Selected Wells on Run tab in Start Run Window
This Sample Names file cannot be created in the Sample Names
Editor window because the files created in the Sample Names
Editor window always contain one row for each well in the plate.
The Sample Names files for selecting wells are typically created by
a LIMS or can be created in Microsoft Excel.

PerkinElmer LabChip GX Specifications

General

Brand	PerkinElmer
Model	LabChip GX
Category	Measuring Instruments
Language	English