PerkinElmer LabChip GX - Restoring CFR Files

Software Security 140
V4.2 LabChip GX User Manual PerkinElmer
Restoring CFR Files
To restore the CFR files from a manual backup point, you must
restore both the CDR data files and the Audit Trail database. If
restoring the files to a new computer, install the LabChip GX
software and then restore the CFR files.
Setting the CDR folder as accessible
1 Log in to the computer with a User Name in the Administrator
group.
2 For Windows 7: Right-click on the LabChip GX icon on the
Windows desktop and select Run as Administrator.
For Windows XP: Double-click on the LabChip GX icon on the
Windows desktop
3 Log in to the LabChip GX CFR software as the Administrator
user.
4 On the LabChip GX main window, select Tools CDR Utility.
The CDR Utility Window opens.
5 Select the Accessible by Windows Administrator Level
Users check box and then click the Apply button.
6 Click OK in the Confirmation window.
7 Click the Close button on the CDR Utility Window.
8 Close the LabChip GX software.
Restoring the CDR Folder
1 In Windows Explorer, navigate to C:\Program Files\Caliper Life
Sciences\.
2 Delete the existing \CDR\ folder.
3 Copy the backed up \CDR\ folder into the folder. (See “Backing
Up CFR Files” on page 138.)