Data Analysis 87
V4.2 LabChip GX User Manual PerkinElmer
Adjust Pane Widths
The LabChip GX Main Window displays several different views of
the data files open in the workspace. You can change the height
and width of the views to make the views smaller or larger.
To adjust panes:
1 Place the cursor over the edge of the pane that you want to
adjust. The cursor changes to a line with arrows on each end.
2 Click and drag up, down, left, or right. The pane is resized after
you release the mouse button. The layout setting is saved as
part of the collection.
3 To save the setting, save the workspace. To create new
collections with the same settings, the collection can be saved
as a collection template (see “Collection Menu” on page 146).
Show or Hide Views
The views displayed in the LabChip GX Main Window can be
hidden to maximize other views in the main window.
To hide a view:
1 Select Collection Layout on the LabChip GX Main window.
The Layout Options Window opens.
2 Click on the location that is selected for the view to clear the
selection. The view is hidden.
3 If a location (Left, Right, or Bottom) does not contain any views,
the pane closes and the remaining panes enlarge to fill the
space.
Note: The Gel View is always displayed and cannot be hidden.
To display a hidden view:
1 Select Collection Layout on the LabChip GX Main window.
The Layout Options Window opens.
2 Click on the desired location for the hidden view (Left, Right, or
Bottom). If multiple views are displayed in the same location,
use the tabs at the top of the location to switch between views.
To Next Page
Loading...
Need help?
General
