PerkinElmer LabChip GX - Unlock Application Window

Software Reference 258
V4.2 LabChip GX User Manual PerkinElmer
Unlock Application Window
Use the Unlock Application Window to access the LabChip GX
software after it automatically locks. This window displays on top of
the LabChip GX software when the software is locked. The
automatic lock option is set in the Set Policies tab on the User
Administration Window. This window only displays if the 21 CFR
Part 11 option is installed.
Figure 120. Unlock Application Window
The Unlock Application Window contains:
Option/Button Function
Username Type the user name of the current user or a LabChip GX
administrator’s user name.
Password Type the password for the specified user name.
OK button Verifies the username and password and opens the LabChip
GX software if the username and password are correct.