R&S SMA100B - Page 209

List and sweep mode
R&S
®
SMA100B
209User Manual 1178.3834.02 ─ 09
Since the table and navigation functions can be assumed to be known, the following
description contains a brief overview, shown by the example of the "Edit List Mdoe
Data" dialog. If a function relates to a particular dialog, it is explicitly stated.
Settings
Edit List Mode Data.....................................................................................................209
Data handling keys......................................................................................................209
└ Go To............................................................................................................ 209
└ Edit................................................................................................................210
└ Fill with Sensor..............................................................................................210
└ Save As/Save............................................................................................... 210
Fill................................................................................................................................210
Edit List Mode Data
Table with values for list or user correction processing.
Note: Once you enter a value, the editor automatically adds preset values in the other
columns. This functionality protects against data loss, otherwise incomplete rows are
lost when saving. You can simply override these values.
"Frequency /Hz"
Sets the frequency values.
Remote command:
[:SOURce<hw>]:LIST:FREQuency on page 669
[:SOURce<hw>]:CORRection:CSET:DATA:FREQuency on page 637
"Power /dBm" (list mode data table)
Sets the level values.
Remote command:
[:SOURce<hw>]:LIST:POWer on page 671
"Correction Value /dBm" (user correction data table)
Sets the level values.
Remote command:
[:SOURce<hw>]:CORRection:CSET:DATA:POWer on page 637
"Dwell /s"
In list mode, sets the dwell time values.
Remote command:
[:SOURce<hw>]:LIST:DWELl:LIST on page 668
Data handling keys
Standard functions for file and data handling.
Go To ← Data handling keys
Selects a row for editing.
List editor