R&S SMA100B - Page 319

File and data management
R&S
®
SMA100B
319User Manual 1178.3834.02 ─ 09
You access this generic standard function each time you perform one of the following:
●
Save or load (settings) files
●
Define a folder in that these files are saved
●
Navigate through the file system.
The dialog name changes depending on the context. The provided functions are self-
explanatory and similar.
Use the settings for example as follows:
●
To navigate through the file system, use the directory tree.
●
To create a file, load and save files, use the dedicated functions "New", "Select",
Save, and Recent files.
●
To access the general data list editor, use the"Edit" button
(see also Chapter 7.7, "List editor", on page 207).
●
To perform standard file management functions, like create directories, move, copy,
delete files and/or directories, use the standard "File Manager" function (see Chap-
ter 11.8, "Using the file manager", on page 324).
Remote command:
To list all files in a directory:
:MMEMory:CDIRectory on page 462
:MMEMory:CATalog? on page 461
[:SOURce]:CORRection:CSET:CATalog? on page 639
Recent files
Displays the files last used.
Show SCPI List
Opens the "SCPI List", which lists the current settings of the R&S SMA100B as SCPI
commands.
The R&S SMA100B provides this function for Operation Mode > SCPI-Export.
SCPI List
Contains a list of all SCPI commands corresponding to the current instrument settings.
See also "How to create a SCPI list with the current instrument settings in one step"
on page 435
Save
Saves the current instrument settings under the defined filename.
Remote command:
:MMEMory:STORe:STATe on page 466
Save Immediate x
Stores the current instrument setting in one of the intermediate memories.
These instrument settings are retained until a different instrument setting is stored in
the intermediate memory. When the instrument is switched off, the contents of the
intermediate memories are retained.
Remote command:
*SAV on page 453
Saving and recalling instrument settings