Siemens Hicom 112 User Manual

System programming in expert mod
e
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
7-15
Administration and maintenance
15 Incoming calls
15 11 11 11 DDI numbers, ext. number (old) is displayed, enter (new) ext. num-
ber
15 12 12 12 Attendant code (DDI), enter new console code (max. 11 characters)
15 13 13 13 Intercept position, day, enter new destination, group or ext. no.
(max. 5 characters)
15 14 14 14 Intercept position, night, enter new destination, group or ext. no.
(max. 5 characters)
15 15 15 15 Intercept options
15 15 15 15 1 No answer, 0 = no/1 = yes
15 15 15 15 2 Busy, 0 = no/1 = yes
15 15 15 15 3 Invalid, 0 = no/1 = yes
15 15 15 15 4 Incomplete, 0 = no/1 = yes
15 15 15 5 Recall, 0 = no/1 = yes
15 16 16 16 Group setup
15 16 16 16 1 Group members, select group and assign dest. (1–8)
15 16 16 16 2 Group type, select group and type
1 = cyclic hunting group
2 = linear hunting group
3 = group ringing
4 = group ringing, no answer
15 16 16 16 3 Group name, select group 881–888 and enter name
15 17 17 17 Call allocation, day, select line and assign ext. no.
15 18 18 18 Call allocation, night, select line and assign ext. no.
15 19 19 19 Call forwarding
15 19 19 19 1 Call management lists, select list 1–16 and dest. index 1–4 and ext.
no. or enter * for dialled ext. or # to search all exts.
15 19 19 19 2 Internal calls, select ext./grp., assign 11–74/881–888 and a call
dest. list
15 19 19 19 3 External calls, day, select ext./grp., assign 11–74/881–888 and a
call dest. list
Codes Function
ABC
A
= SW 2.0.1+;
B
= SW 2.0.2;
C
= SW 2.1
Table 7-4 Codes for expert mode

Siemens Hicom 112 Specifications

General

Brand	Siemens
Model	Hicom 112
Category	Telephone
Language	English