Siemens Hicom 112

System programming in expert mode
Administration and maintenance
A31003-K16-X001-3-7620
,
07/99
7-16
Hicom 100 E Version 2.1, Service manual
15 19 19 19 4 External calls, night, select ext./grp., assign 11–74/881–888 and a
call dest. list
15 19 19 19 5 Number of ring attempts, select list 1–16 and define the ring at-
tempts (1–15)
15 19 19 19 6 Common ringer, PEN, select list 1–16 and define ext. or actuator
(*1–*4)
15 19 19 19 7 Common ringer, mode, select list 1–16 and set 1 = immediately or
2 = after timeout
15 20 20 20 Consultation-call prevention (BRA only) 0 = off/ 1 = on
15 21 Signalling type, 0=call type 1, 1=call type 2, 2=call type 3
Codes Function
ABC
A
= SW 2.0.1+;
B
= SW 2.0.2;
C
= SW 2.1
Table 7-4 Codes for expert mode