Siemens Hicom 112 User Manual

A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1
,
Service manual
Z-3
Index
extension (as of SW version 2.0.2) 10-69
changing the display language throug-
hout the system (up to SW 2.0.1+) 10-69
data compression/extension (as of SW
version 2.0.2) 10-72
display during recall (as of SW version
2.0.2) 10-70
displaying the call duration 10-70
name display (as of SW version 2.0.2)
10-70
transfer without notification display (as of
SW version 2.0.2) 10-71
Documentation 2-3
Doorline M02 entrance telephone 11-9
Doorline M02 entrance telephone (four recei-
ving extensions for doorbell) 11-10
Doorphone setup 10-24
programming receiving extension for the
doorbell 10-26
Programming receiving extension for the
doorbell (as of SW version 2.0.2) 10-26
setting up an entrance telephone (up to
SW 2.0.1+) 10-24
setting up the entrance telephone (as of
SW version 2.0.2) 10-25
DTMF remote administration and mainte-
nance 7-45
DTMF remote administration and mainte-
nance procedure 7-46
E
EB 118-2 expansion module 12-17
EB 64 expansion module 12-17
EB interfaces - Hicom 118-2 expansion box
12-17
EGUCOM door opener system from Acker-
mann (Emmerich) 11-5
Enhanced door opener functions 4-17
Entrance telephone system with Telegärtner
amplifier and Siedle entrance telephone
11-8
Entrance telephones 11-3
connection via door opener adapter box
11-4
connector examples 11-5
direct connection without door opener
11-3
direct door opener connection 11-3
Equipping sequence for extension and trunk
modules 3-9
Equipping sequence for subscriber and trunk
modules 5-6
Equipping sequence for the basic box 12-17
Equipping sequence for the expansion box
12-18
Error messages for network settings 6-16
Euro-ISDN to extension S0 4-14
Euro-ISDN to PBX 4-13
Euroset line 36
connection options supported within sy-
stem environment 12-1
contact assignment of the MB interfaces
12-13
hardware overview 12-1
MB interfaces 12-13
module overview 12-12
motherboard 12-12
standard numbering, MB 4/4 12-12
structural concept (SW 2.0.1+) 12-5
structural concept (SW 2.0.2) 12-6
system overview (Version 2.0.1+) 12-5
system overview (Version 2.0.2) 12-6
Euroset line 36/Hicom 118-2 12-1
Examples of corporate networks 8-10
EXM interfaces (2 versions) 3-30
EXM/MPPI 3-30
Expert mode 7-8
Extending an undialed line 4-18
Extension and line number allocation 5-6
Extension interface for normal telephone 2-
10
Extension interfaces (a/b) 3-10
Extension interfaces (UP0/E) 3-10
Extension number for internal S0 extension
5-12
Extension number plan, two-box system 6-4
Extension number plans of the add-on modu-
les 3-9

Siemens Hicom 112 Specifications

General

Brand	Siemens
Model	Hicom 112
Category	Telephone
Language	English