Tektronix MSO56 User Manual

Commands listed in alphabetical order
Examples
BUS:B1:FLEXra
y:SOUrce:TXRX CH1
sets the TXRX source the channel 1.
BUS:B1:FLEXray:SOUrce:TXRX ? might return
:BUS:B1:FLEX
RAY:SOURCE:TXRX CH1_D0
indicating the TXRX source is
set to CH1_D0.
BUS:B<x>:FLEXray:THRESHold
This command sets or queries the FlexRay data source high threshold for the
specified bus. The bus is specified by x.
Conditions
Requires option SR-AUTO.
Group
Bus
Syntax
BUS:B<x>:FLEXray:THRESHold <NR3>
BUS:B<x>:FLEXray:THRESHold ?
Arguments
<NR3> is the FlexRay data source high threshold fo
rthespecified bus.
Examples
BUS:B1:FLEXray:THRESHold 50.0-3 sets the high threshold to 50 mV.
BUS:B1:FLEXray:THRESHold? might return : BUS:B1:FLEXRAY:THRESHOLD
0.0E+0
indicating the high threshold is set to 0.0 V.
BUS:B<x>:FLEXray:TXRXTHRESHold
This command sets or
queries the FlexRay data source TxRx threshold for the
specified bus. The bus is specified by x.
Conditions
Requires option SR-EMBD.
Group
Bus
Syntax
BUS:B<x>:FLEXray:TXRXTHRES Hold <NR3>
BUS:B<x>:FLEXray:TXRXTHRES Hold?
Arguments
<NR3> is the TxRx threshold.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-143

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English