Tektronix MSO56 - DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts? (Query Only); DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition; DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts? (Query Only)

Commands listed in alphabetical order
DISplay:REFF
FTView<x>:CURSor:HBArs:AUNIts? (Query Only)
This command returns cursor A vertical units of the specified cursor in the
specified view.
Group
Cursor
Syntax
DISplay:REFFFTView<x>:CUR Sor:HBArs:AUNIts?
Returns
Returns the cursor A vertical units of the speci fied cursor in the specified view.
Examples
DISplay:REFFFTView5:CURSo r:HBArs:AUNIts? might return
:DISPLAY:REFFFTVIEW5:CURS OR:HBARS:AUNITS "dBm" indicating the A
cursor units are d Bm.
DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition
This command sets or queries the vertical cursor B position of the specified cursor
in the specified view.
Group
Cursor
Syntax
DISplay:REFFFTV
iew<x>:CURSor:HBArs:BPOSit ion
<NR3>
DISplay:REFFFTView<x>:CUR Sor:HBArs:BPOSition?
Arguments
<NR3> is the vertical cursor B position of the specified cursor in the specified view.
Examples
DISplay:REFFFTView5:CURSo r:HBArs:BPOSition -90 sets the B cursor
position to -90.
DISplay:REFFFTView5:CURSo r:HBArs:BPOSition? might
return
:DISPLAY:REFFFTVIEW5:CURSOR :HBARS:BPOSITION
-100.6262359333038
indicating the B cursor position is -100.6.
DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts? (Query Only)
This command returns the cursor B vertical units of the specified
cursor in the
specified view.
2-266 MSO54, MSO56, MSO58, MSO58LP Programmer