Commands listed in alphabetical order
DISPLAY:INTEN
SITY:BACKLIGHT?
might return
:DISPLAY:INTENSITY:BACKLI GHT HIGH, indicating that the display backlight
issettofullbrightnesslevel.
DISplay:INTENSITy:BACKLight:AUTODim:ENAble
Sets or queries the state of the display auto-dim feature. The default is enabled.
Once the backlight has dimmed, any button push, knob turn or mouse movement
returns the backlight value to the value set by :DIS
play:INTENSITy :BACKLight.
Group
Display Control
Syntax
DISplay:INTENSITy:BACKLig ht:AUTODim:ENAble {ON|OFF }
DISplay:INTENSITy:BACKLig ht:AUTODim:ENAble?
Related Commands
DISplay:INTENSITy:BACKLight
Arguments
ON enables the display auto-dim feature.
OFF disables the display auto-dim feature.
Examples
DISPLAY:INTENSITY:BACKLIG HT:AUTODIM:ENABLE ON enables
auto-dimming of the backlight.
DISPLAY:INTENSITY:BACKLIG HT:AUTODIM:ENABLE? might return
:DISPLAY:INTENSITY:BACKLI GHT:AUTODIM:ENABLE ON indicating that
auto-dimming of the backlight is enabled.
DISplay:INTENSITy:BACKLight:AUTODim:TIMe
Sets or queries the amount of time, in minutes, to wait for no user interface activity
before automatically dimming the display. The time can range from a minimum of
10 minutes to a maximum of 1440 minutes (24 hours). The default is 10 minutes.
Group
Display Control
Syntax
DISplay:INTENSITy:BACKLig ht:AUTODim:TIMe <NR1>
DISplay:INTENSITy:BACKLig ht:AUTODim:TIMe?
Arguments
<NR1> is the amount of time, in minutes, to wait for no user interface activity
before automatically dimming the display.
2-232 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
