Commands listed in alphabetical order
WFMOUTPRE:BIT
_NR?
might return :WFMOUTPRE:BIT_NR 8, indicating that
outgoing RI or RP binary format data uses 8 bits per waveform point.
WFMOutpre:BN_Fmt
This co
mmand sets or queries the format of binary data for outgoing w aveforms
specified by the DATa:SOUrce command.
Group
Wavef
orm Transfer
Syntax
WFMOutpre:BN_Fmt {RI|RP|FP}
WFMOutpre:BN_Fmt?
Related Commands
DATa:SOUrce
Arguments
RI specifies signed integer data point representation.
RP specifies positive integer data point representation.
FP specifies floating point representation.
Examples
WFMOUTPRE:BN_FMT FP specifies that outgoing waveform data will be in
single-precision binary floating point format.
WFMOUTPRE:BN_FMT? might return :WFMOUTPRE:BN_FMT RI, indicating that
the outgoing waveform data is currently in signed integer format.
WFMOutpre:BYT_Nr
This command sets or queries the binary field data width (bytes per point) for the
waveform specified by the DATa:SOUrce command. Note that values will be
constrained according to the underlying waveform data. This specification is only
meaningful when WFMOutpre:ENCdg is set to BIN, and WFMOutpre:BN_Fmt
is set to either RI or RP.
Group
Waveform Transfer
Syntax
WFMOutpre:BYT_Nr <NR1>
WFMOutpre:BYT_Nr?
Related Commands
DATa:SOUrce, WFMOutpre:BN_Fmt, WFMOutpre:ENCdg
2-892 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
